CONTACT US

· Hot line: 0086 13864024831

· Skype: peter.wang666

· E-mail: dcipipe@163.com

· Website: www.ccxhpipe.com

· Add: Nancun Industrial Area, Jincheng City, Shaxi Province, China

Water Hammer Protection System

Product Name:Water Hammer Protection System

Product Details:
The water hammer protection system is used on water supply pipeline, connection with the pumping mainline.

E-mail : dcipipe@163.com


                                   

                surge tank and water hammer protection System

 
 
 
Description:

The water hammer protection system is used on water supply pipeline, connection with the pumping mainline. Under normal working situation, the pressure of air and water in the tank are the same. The working principle is : 
1.When the pressure of the pipeline rise, the water will enter the tank and the level will raise, then water will compress the air on the top of the tank. The water will not stop entering until the pressure of the air and water are the same.                                                    
 
2.When the pressure of the pipeline drop, the air pressure in the tank is higher than the system, and then the water will be pushed out into the pipeline by the air, so the system pressure will not drop too much.
Specification of surge tank:
item Material Shape standard volume pressure coating
Pressure tank without bladder Carbon Steel /
Customized
 
Vertical /
Horizontal /
Customized
ASME/EN/GB 1m³-100m³ 16/25/40bar Customized Inside :Epoxy coating(food grade)
Outside: epoxy/polyurethane coating
Bladder Pressure tank Carbon Steel /
Customized
 
Vertical /
Horizontal /
Customized
ASME/EN/GB 1m³-10m³ 16bar/25bar/ Customized Inside :Epoxy coating(food grade)
Outside: epoxy/polyurethane coating
Spare parts Air release valve, magnetic level gauge, level control switch, pressure gauge
 
Specification of compressors:
 
We use Ingersoll Rand or Atlas with top quality. According to the volume of the tank and work pressure, we choose different type compressors. If the pressure is 12, 16, 25bar or higher, we must choose piston compressors; If the pressure is below 10bar, we can choose piston or screw type.
If the capacity of one piece compressor is not enough, we can choose screw type or use two or three pcs piston type in parallel to achieve the capacity.
 
If needed automatic control of the system, we can supply the control panel and accessories. Using Schneider Electric components and Siemens PLC and screen according to the requirement. Or just using the simple manual control panel for the compressors.




RELATION PRODUCT

MESSAGE